Yashica FX-7 SUPER 2000 Dokumentacja

Yashica FX-3 FX-7 (Super 2000) This camera manual library is for reference and historical purposes, all rights reserved. This page is copyright by m

Overexposure Only the red ( + ) LED turns on. It means your subject is too bright. Stop down the aperture or use a faster shutter speed to turn on t

If you reach the end of the film, the Film Advance Lever will no longer operate. Do not force it Check the Exposure Counter to make sure the end of th

contrary, your subject will turn out ooverexposed and light. In such cases, reduce the amount of exposure to half r one-fourth so that it is correctly

USING THE SELF TIMER If you want to include yourself in the picture, mount the camera on a tripod and trip the shutter with the aid of the self-tim

This flash signalHowever, the automatic shutter speeoperate. will also turn on with the Yashica CS-201 Auto, Contax TLA20 or TLA30 on the camera. d

DEPTH OF FIELD When the lens is focused on a subject, it will turn out sharpest in the picture. However, the zone of sharpneedepth of field of a le

· Do not subject the camera to abrupt temperature changes because moisture can condensate inside the camera and cause faulty electrical contact. · T

Film Loading 16 Setting the Film Speed 22 Focusing the Lens 24 Shutter Speed and Aperture 28 Exposure Setting 30 Taking Pictures 34 Film Rewindi

8. Direct X Contact 9. Accessory Shoe 10. Lens Mounting Index 11. Film Rewind Crank 12. Film Rewind Knob 13. Grip 14. Lens Release Button 15.

< Mounting the Lens > First, remove the camera body cap by turning it counterclockwise. Then align the red dot on the lens barrel with the

· While mounting and dismounting the lens, do not touch the lens glass and the inside of the camera. · If you are changing the lens with film in th

FILM LOADING Use 35 mm cassette film. Always load and unload film in subdued light (never in direct sunlight). 1. Open the Camera Back by pulling t

The Exposure Counter will advance each time the Film Advance Lever is wound, and return to "S" when the Camera Back is opened. It is engrave

<Focusing with the Microprism Collar and Matte Screen > Turn the Focusing Ring until your subject on the microprism collar or the matte screen

turned to a one step lower number, the amount of exposure will be doubled. The numbers "1", "2",... "1000" on the dia